Descrizione Clinica
AIR PTO VIII
Description
portable nebulizer.
Mode of use
1. Open the lid of the spraying amp.
2. Add the solution to nebulize. Please do not exceed the volumetric heel indicated.
3. Close the cover of the spraying amp.
4. Connect the mask or the mouthpiece.
5. Turn on the device for nebulization.
Cleaning guidelines
PRELIMINATION
1. Rotate the removable parts of the spraying amp clockwise to loosen them and then remove them.
2. Open the sprayer amp cover and clean the nebulized solution residues.
3. Please clean the machine with a clean medical gauze after nebulization. Do not touch the central area of the spraying amp to avoid damage to its operation.
REGULATIONS
1. Hold the pressure button and lift the spraying amp.
2. Clean the inside of the spraying amp. Dip the spraying amp in clean and warm water for about 5 minutes (water temperature must be less than 40 °C). Do not remove any other item from your device.
Warnings
- Always add the solution to nebulize before turning on the device.
- Do not use distilled water, purified water or oily substances for nebulization.
- Always clean the device and accessories after each use.
- Always dry the device and accessories after each use.
- Do not touch the inside of the device with sharp or hard objects or fingers in case of malfunction.
Please charge your device for at least 30 minutes before first use.
If the orange light of the ignition button flashes and nebulize solution is not exhausted, please press the start button to continue the aerosol therapy.
Before loading the device, make sure that the plug is connected is correct and that date provided with the kit.
Please do not use this charging tool with other electronic devices.
Make sure that the nebulization amp is inserted is installed correctly, otherwise the nebulizer will not work.
When installing the spout, the metal probe must be in the groove of the device, and the two sides of the spout should be inserted correctly.
Please keep all contact points clean and dry after use.
portable nebulizer.
Mode of use
1. Open the lid of the spraying amp.
2. Add the solution to nebulize. Please do not exceed the volumetric heel indicated.
3. Close the cover of the spraying amp.
4. Connect the mask or the mouthpiece.
5. Turn on the device for nebulization.
Cleaning guidelines
PRELIMINATION
1. Rotate the removable parts of the spraying amp clockwise to loosen them and then remove them.
2. Open the sprayer amp cover and clean the nebulized solution residues.
3. Please clean the machine with a clean medical gauze after nebulization. Do not touch the central area of the spraying amp to avoid damage to its operation.
REGULATIONS
1. Hold the pressure button and lift the spraying amp.
2. Clean the inside of the spraying amp. Dip the spraying amp in clean and warm water for about 5 minutes (water temperature must be less than 40 °C). Do not remove any other item from your device.
Warnings
- Always add the solution to nebulize before turning on the device.
- Do not use distilled water, purified water or oily substances for nebulization.
- Always clean the device and accessories after each use.
- Always dry the device and accessories after each use.
- Do not touch the inside of the device with sharp or hard objects or fingers in case of malfunction.
Please charge your device for at least 30 minutes before first use.
If the orange light of the ignition button flashes and nebulize solution is not exhausted, please press the start button to continue the aerosol therapy.
Before loading the device, make sure that the plug is connected is correct and that date provided with the kit.
Please do not use this charging tool with other electronic devices.
Make sure that the nebulization amp is inserted is installed correctly, otherwise the nebulizer will not work.
When installing the spout, the metal probe must be in the groove of the device, and the two sides of the spout should be inserted correctly.
Please keep all contact points clean and dry after use.
