Descrizione Clinica
ETILOMETRO PORTATIO
Description
Etylometer.
Type of tester designed to measure the concentration of breathing alcohol in human copro. This device uses an advanced flat surface alcohol sensor, which offers excellent sensitivity and reproducibility. Modern and portable design makes it more convenient for personal use.
If the alcohol content exceeds the preset limit level, this device will send an audio and video alert to remember safety.
Mode of use
1. When you use it for the first time, prepare three 1.5V AAA batteries, remove the battery cover, install the batteries and then return the lid.
2. Press the power button.
3. "Pre-heating" from 1 to 10 seconds, start countdown for pre-heating. Wait 10 seconds to complete pre-heating.
4. After completion of pre-heating, the device automatically enters the countdown six seconds to detect the bellows. Wait for the test results.
PRE-RISCALD
1. Press and hold the power button for 2 seconds. After the sound of the "cuttering", the tester display will start.
2. Pre-heating" appears on the digital display, with a 10-second countdown. When countdown reaches 0, pre-heating is completed.
TEST
1. After completion of the "heating", enter the state of "suffering". The display will show a countdown of 10 seconds. Blow air in the front of the device for three seconds, until the sound of the "driving" indicates to stop the blowing. Wait a few seconds to view the measurement results (if air is not blown, the result will be 0).
Measurement results
LUCE VERDE: status under the limits: when measuring is GIALLA LIGHT: alcohol consumption status: alcohol guide: refers to vehicle driving behaviour with blood alcohol content ≥0,3 g/l.
Light on, alarm issued.
LUCE ROSSA: state of drunkenness: jew status guide: refers to the driving behaviour of a vehicle with a blood alcohol content ≥0,5 g/l.
The red light turns on and the alarm sounds quickly.
Warnings
The first time the etylometer is extracted from the package, or when it is not used for a long time, a large amount of gas and other impurities can adhere to the sensor. In this case, you must press the power button several times to clean the etylometer by heating it.
Do not use the product in case of damaged. Do not disassemble or alter the product without authorization. Do not immerse the product in water. It's not a toy. Keep away from the reach of children. The appliance should not be used by persons with reduced physical problems, sensory or reduced mental capacity, or lack of knowledge experience, unless they are under adult supervision or have not been provided with adequate instructions.
1. This product is not able to determine whether it is driving in drunkenness.
2. Opinions are based on general symptoms and criteria. Even with the same concentration of alcohol, the degree of intoxication varies according to physical conditions and personal differences.
3. Regardless of the use or not of an etylometer, the relevant personnel of the manufacturer and retailers will not be responsible for driving in a state of drunkenness or for behavior prohibited by law.
4. Alcohol takes about 20 minutes to be absorbed into the bloodstream through the digestive system. It is therefore recommended to carry out the measurement after 20 minutes from alcohol intake. If the measurement is carried out immediately after drinking, the results can reflect the concentration of alcohol, but not the level of alcohol in the blood.
5. To achieve more accurate measurement results, the interval between two consecutive measurements must be more than three minutes.
6. Do not disassemble or wash the device. Store it in a place with few smells.
7. There is a clear margin of error between the measured result and the actual value when measured at low power.
8. Keep away from the direct sunlight and do not bump or overly vibrate the device. Avoid heat sources.
Cod. MR997
Etylometer.
Type of tester designed to measure the concentration of breathing alcohol in human copro. This device uses an advanced flat surface alcohol sensor, which offers excellent sensitivity and reproducibility. Modern and portable design makes it more convenient for personal use.
If the alcohol content exceeds the preset limit level, this device will send an audio and video alert to remember safety.
Mode of use
1. When you use it for the first time, prepare three 1.5V AAA batteries, remove the battery cover, install the batteries and then return the lid.
2. Press the power button.
3. "Pre-heating" from 1 to 10 seconds, start countdown for pre-heating. Wait 10 seconds to complete pre-heating.
4. After completion of pre-heating, the device automatically enters the countdown six seconds to detect the bellows. Wait for the test results.
PRE-RISCALD
1. Press and hold the power button for 2 seconds. After the sound of the "cuttering", the tester display will start.
2. Pre-heating" appears on the digital display, with a 10-second countdown. When countdown reaches 0, pre-heating is completed.
TEST
1. After completion of the "heating", enter the state of "suffering". The display will show a countdown of 10 seconds. Blow air in the front of the device for three seconds, until the sound of the "driving" indicates to stop the blowing. Wait a few seconds to view the measurement results (if air is not blown, the result will be 0).
Measurement results
LUCE VERDE: status under the limits: when measuring is GIALLA LIGHT: alcohol consumption status: alcohol guide: refers to vehicle driving behaviour with blood alcohol content ≥0,3 g/l.
Light on, alarm issued.
LUCE ROSSA: state of drunkenness: jew status guide: refers to the driving behaviour of a vehicle with a blood alcohol content ≥0,5 g/l.
The red light turns on and the alarm sounds quickly.
Warnings
The first time the etylometer is extracted from the package, or when it is not used for a long time, a large amount of gas and other impurities can adhere to the sensor. In this case, you must press the power button several times to clean the etylometer by heating it.
Do not use the product in case of damaged. Do not disassemble or alter the product without authorization. Do not immerse the product in water. It's not a toy. Keep away from the reach of children. The appliance should not be used by persons with reduced physical problems, sensory or reduced mental capacity, or lack of knowledge experience, unless they are under adult supervision or have not been provided with adequate instructions.
1. This product is not able to determine whether it is driving in drunkenness.
2. Opinions are based on general symptoms and criteria. Even with the same concentration of alcohol, the degree of intoxication varies according to physical conditions and personal differences.
3. Regardless of the use or not of an etylometer, the relevant personnel of the manufacturer and retailers will not be responsible for driving in a state of drunkenness or for behavior prohibited by law.
4. Alcohol takes about 20 minutes to be absorbed into the bloodstream through the digestive system. It is therefore recommended to carry out the measurement after 20 minutes from alcohol intake. If the measurement is carried out immediately after drinking, the results can reflect the concentration of alcohol, but not the level of alcohol in the blood.
5. To achieve more accurate measurement results, the interval between two consecutive measurements must be more than three minutes.
6. Do not disassemble or wash the device. Store it in a place with few smells.
7. There is a clear margin of error between the measured result and the actual value when measured at low power.
8. Keep away from the direct sunlight and do not bump or overly vibrate the device. Avoid heat sources.
Cod. MR997
