Descrizione Clinica
DUAL LOCK T
Description
Medical device.
Tutor for mechanical immobilization of the joint of the wrist and the first finger.
Equipped with modelable aluminum side rack, top multiple loop and thumb bracket.
Anatomical grinding for optimal control of the wrist. Openable completely.
Closure by means of 3 strap fasteners equipped with safety fins to prevent the exit from the multiple loop. Elongated central band for greater stabilization of the thumb customizable to grip.
Mode of use
The fastening system with the upper multiple loop does not need to be completely loose to wear or remove the brace. Brush the fastening straps and wear the wrist.
Close the thumb strap.
For the orthopaedic technician: extract the moldable sticks, adapt them to the patient and then reinsert them.
Cleaning
Normal hand washing, at a maximum temperature of 30° with neutral soap. Rinse thoroughly.
It is recommended to remove the moldable stick and close the tear closures before washing the device.
Don't sing. Do not dry in rotary drum dryer. Don't iron. Do not wash dry.
Components
Interior material in soft fabric Sensitive Fabrics with protection padding and holes for greater breathability.
External material in gripping velvet for total adaptability.
Top multiple loop in technopolymer.
Support spout for modelable aluminum thumb.
Warnings
Only for adults.
Use on integral skin. If there are wounds, protect it as from medical indications.
Do not use in case of wear, break or non-integrity of the material.
The packaging and instructions are part of the medical device.
The modification/alteration of the medical device excludes any responsibility of the manufacturer.
To avoid a possible loss of product functionality or a limited duration of the product, it is recommended to prevent/limit contact between the device and creams, oils, lotions or fatty or acidic substances.
Do not change the adjustments made by the doctor or technician orthopedic on the medical device so as not to lead to a loss of functionality of the product.
The product does not include accessories and has not been designed to be used in combination with other medical devices (for example in case of application of creams, wait for the time necessary to their full absorption).
Ortesis is made for the exclusive use of a single patient.
This class I medical device must be used with the appropriate warnings given in these instructions, in combination with those provided by the orthopedic technician or by the attending physician.
Conservation
Store in a dry place at room temperature. Protect from heat, direct exposure to sunlight and moisture.
Format
Available in the right and left measurements, in the sizes S, M and L
Height: 21 cm
Cod.
DUA-300 DX.S (right, size S)
DUA-300 DX.M (right, size M)
DUA-300 DX.L (right, size L)
DUA-300 SX.S (left, size S)
DUA-300 SX.M (left, size M)
DUA-300 SX.L (left, size L)
Medical device.
Tutor for mechanical immobilization of the joint of the wrist and the first finger.
Equipped with modelable aluminum side rack, top multiple loop and thumb bracket.
Anatomical grinding for optimal control of the wrist. Openable completely.
Closure by means of 3 strap fasteners equipped with safety fins to prevent the exit from the multiple loop. Elongated central band for greater stabilization of the thumb customizable to grip.
Mode of use
The fastening system with the upper multiple loop does not need to be completely loose to wear or remove the brace. Brush the fastening straps and wear the wrist.
Close the thumb strap.
For the orthopaedic technician: extract the moldable sticks, adapt them to the patient and then reinsert them.
| Sizes | Wrist circumference |
| S | 14-18 cm |
| MM | 19-23 cm |
| L | 24-28 cm |
Cleaning
Normal hand washing, at a maximum temperature of 30° with neutral soap. Rinse thoroughly.
It is recommended to remove the moldable stick and close the tear closures before washing the device.
Don't sing. Do not dry in rotary drum dryer. Don't iron. Do not wash dry.
Components
Interior material in soft fabric Sensitive Fabrics with protection padding and holes for greater breathability.
External material in gripping velvet for total adaptability.
Top multiple loop in technopolymer.
Support spout for modelable aluminum thumb.
Warnings
Only for adults.
Use on integral skin. If there are wounds, protect it as from medical indications.
Do not use in case of wear, break or non-integrity of the material.
The packaging and instructions are part of the medical device.
The modification/alteration of the medical device excludes any responsibility of the manufacturer.
To avoid a possible loss of product functionality or a limited duration of the product, it is recommended to prevent/limit contact between the device and creams, oils, lotions or fatty or acidic substances.
Do not change the adjustments made by the doctor or technician orthopedic on the medical device so as not to lead to a loss of functionality of the product.
The product does not include accessories and has not been designed to be used in combination with other medical devices (for example in case of application of creams, wait for the time necessary to their full absorption).
Ortesis is made for the exclusive use of a single patient.
This class I medical device must be used with the appropriate warnings given in these instructions, in combination with those provided by the orthopedic technician or by the attending physician.
Conservation
Store in a dry place at room temperature. Protect from heat, direct exposure to sunlight and moisture.
Format
Available in the right and left measurements, in the sizes S, M and L
Height: 21 cm
Cod.
DUA-300 DX.S (right, size S)
DUA-300 DX.M (right, size M)
DUA-300 DX.L (right, size L)
DUA-300 SX.S (left, size S)
DUA-300 SX.M (left, size M)
DUA-300 SX.L (left, size L)
