Description
Clinical thermometer without mercury.
To be used to measure human body temperature.

Mode of use
The thermometer must be disinfected with 75% alcohol before use. First, firmly hold the top of the thermometer with your fingers and shake it down to bring the liquid column below 35 °C, then place the thermometer bulb under the user's axle and after 5 minutes proceed with the reading of the result. During reading, slightly tilt the thermometer bulb forward and back for better visibility.

Warnings
1. Before measuring body temperature, it is necessary to avoid all factors that can affect the actual body temperature (such as doing an intense exercise, drinking hot water or cold drinks, etc.).
2. The maximum temperature of the thermometer and 42 °C, therefore the temperature of the same should not exceed 42 °C during storage or disinfection.
3. This product is made of glass, therefore it is necessary to pay attention not to make it bump against hard objects in everyday use or to make it fall to the ground.
4. Due to the thin glass of the thermometer bulb, avoid excessive vibrations during storage, transportation and use.

Conservation
The packaged thermometer must be stored in a room with room temperature not exceeding 42 °C, dry air, relative humidity not exceeding 80%, absence of corrosive gas and good ventilation.
Integro packaging validation: 60 months.

Cod. 5438