Descrizione Clinica
FFP2 NR
Description
Disposable protection mask.
Individual protection device against particle pollutants in the form of solid aerosols, aerodispersi solids on aqueous basis and liquid aerosols.
Black color.
Mode of use
1. Only for adults.
2. Don't wash.
3. If the mask is damaged, dirty, or if the breathing is difficult, discard the product and replace it with a new one.
4. Open the mask with two hands holding it from the side legs where the welds of the elastic bands are present.
5. To adhere the mask on the face so as to cover nose, mouth and chin.
6. Keeping the mask firmly on the face with one hand, place with the other hand one of the two elastics behind one ear; when finished, change your hand to fix the other elastic behind the other ear.
7. Press with both hands the stringy stringy shaping it no to make it adhere completely to the nose.
Components
PP spunbond TNT, PP meltblown TNT; elastic: nylon.
Warnings
- Do not use if the package is open or damaged.
- Open the outer casing and thoroughly disinfect your hands.
- Check that the elastics are in good condition and are perfectly working.
- Make sure that the stringy stiff is not damaged.
- After wearing the mask on the face, make sure it is perfectly sticky and that there is no leakage.
- If the product manifests sealing losses it will always be possible to adjust it with the tightening.
- The product must be used according to the manufacturer's instructions.
- For proper operation, the product must be worn on face without beard, mustache or external objects. Otherwise, it would be unlikely to meet the requirements for seal loss.
- As far as possible, do not touch the inside of the mask.
- In case of respiratory failure or other pathologies (anxiety, depression, claustrophobia etc.), consult your doctor before use.
- It is remembered that every DPI of the respiratory tract can reduce the communication ability.
The mask should not be used for more than one work shift (6-8 hours). Do not use the mask in polluted environments and/or with oxygen concentration less than 18%. Do not use in explosive atmospheres. The IMP protects the threshold concentration of the particular substance in the working area at 10 times (FPO=10). The expiry date refers to the new product, with intact packaging and in compliance with storage conditions. No use outside of what is indicated in the instructions.
Conservation
Store in a cool, dry and clean place, away from flames or heat sources, at temperature between -5 °C and 50 °C. Maximum humidity value: 75%.
Format
1 mask.
Cod. 2A MTB
Disposable protection mask.
Individual protection device against particle pollutants in the form of solid aerosols, aerodispersi solids on aqueous basis and liquid aerosols.
Black color.
Mode of use
1. Only for adults.
2. Don't wash.
3. If the mask is damaged, dirty, or if the breathing is difficult, discard the product and replace it with a new one.
4. Open the mask with two hands holding it from the side legs where the welds of the elastic bands are present.
5. To adhere the mask on the face so as to cover nose, mouth and chin.
6. Keeping the mask firmly on the face with one hand, place with the other hand one of the two elastics behind one ear; when finished, change your hand to fix the other elastic behind the other ear.
7. Press with both hands the stringy stringy shaping it no to make it adhere completely to the nose.
Components
PP spunbond TNT, PP meltblown TNT; elastic: nylon.
Warnings
- Do not use if the package is open or damaged.
- Open the outer casing and thoroughly disinfect your hands.
- Check that the elastics are in good condition and are perfectly working.
- Make sure that the stringy stiff is not damaged.
- After wearing the mask on the face, make sure it is perfectly sticky and that there is no leakage.
- If the product manifests sealing losses it will always be possible to adjust it with the tightening.
- The product must be used according to the manufacturer's instructions.
- For proper operation, the product must be worn on face without beard, mustache or external objects. Otherwise, it would be unlikely to meet the requirements for seal loss.
- As far as possible, do not touch the inside of the mask.
- In case of respiratory failure or other pathologies (anxiety, depression, claustrophobia etc.), consult your doctor before use.
- It is remembered that every DPI of the respiratory tract can reduce the communication ability.
The mask should not be used for more than one work shift (6-8 hours). Do not use the mask in polluted environments and/or with oxygen concentration less than 18%. Do not use in explosive atmospheres. The IMP protects the threshold concentration of the particular substance in the working area at 10 times (FPO=10). The expiry date refers to the new product, with intact packaging and in compliance with storage conditions. No use outside of what is indicated in the instructions.
Conservation
Store in a cool, dry and clean place, away from flames or heat sources, at temperature between -5 °C and 50 °C. Maximum humidity value: 75%.
Format
1 mask.
Cod. 2A MTB
