Descrizione Clinica
J babies
Baby bottles
Super Glass
Description
Baby bottles.
How to use
At first use, carefully wash all the components in hot water and detergent and sterilize in boiling water for 5 minutes. If you use a sterilizer, follow the manufacturer's instructions.
Before assembling the bottle in all its parts, wash your hands well.
Pour maternal milk or powdered into the bottle and heat up to 37 ° C. Make sure that powdered milk is mixed by following the manufacturer's doses.
Insert the white support in the blank silicone valve. Check that:
- there is no space between the valve and its white support;
- The slot is open before starting the feed.
Insert the zero cannula bubbles (not included in 330 ml bottles) into the blank valve. The zero cannula bubbles prevents the formation of air bubbles in milk which, if they are ingested, could cause gaseous colic and gastric reflux. The cannula can be removed when the child will stop suffering from colic. Never remove the low silicone valve. Low blank in the bottle can prevent possible otitis in the first years of life.
Insert the blank low valve with the zero cannula bubbles in the bottle opening.
Place the teat in the ring nut and screw the ring nut to the bottle (do not tighten too much to allow optimal ventilation).
To mix the milk powder quickly rotate the bottle.
As a precaution it is recommended to check the temperature of the liquid by pouring a few drops on the back of the hand.
Beating the child holding it in my lap in the semi-upright position.
After feeding, remove all parts of the bottle and wash them in hot water and soap. It is recommended to use the set of Twister punches to clean bottle and teat.
Use the special pipe cleaner supplied to clean the inside of the zero cannula bubbles (not included in the 330 ml bottles) but not to use it to clean the low-empty valve or the teat to not perforate them.
After carefully washed the bottle and all its components repeat step 1 or store in a cool, dry place, out of reach of children.
Before warming the liquids in the bottle, loosen or remove the ring nut with the teat to avoid overheating of the content.
To ensure the correct operation of the blank valve, make sure that:
- there is no space between the white valve support and the valve itself;
- the slot is open before the feed; - The ring is well screwed, but not too tight.
Traveling, put the appropriate cap and the sealant disk to avoid losses and dripping from the teat.
Warnings
Temperature changes can cause crepe or bottle break. Before each use check carefully that the bottle's neck has no sharp edges and there are no fragments inside. Do not use the bottle in the presence of cracks or glass fragments inside.
- Keep all components out of the reach of children.
- Heat the liquids to the microwave is not recommended because they could warm up unevenly. Always check the temperature of the liquid before administration.
- Use this product always under the supervision of an adult. Do not leave the baby bottle unattended within reach of a child, it could be dangerous.
- Do not use the pacifier as a nose.
- The continued and prolonged habit of sucking liquids during the day and especially at night - when salivation is reduced - can cause dental caries, even if liquids are not sugary.
- Do not put in bag or in a bottle suitcase containing liquids. If the bottle is accidentally damaged, its content may come out.
Format
Pack containing cap, ring, teat, sealing disk, white plastic support for blank low valve, bass anti-drip base valve, zero cannula bubbles, bottle, cranket for zero cannula bubbles.
Cod. 12052
Baby bottles.
How to use
At first use, carefully wash all the components in hot water and detergent and sterilize in boiling water for 5 minutes. If you use a sterilizer, follow the manufacturer's instructions.
Before assembling the bottle in all its parts, wash your hands well.
Pour maternal milk or powdered into the bottle and heat up to 37 ° C. Make sure that powdered milk is mixed by following the manufacturer's doses.
Insert the white support in the blank silicone valve. Check that:
- there is no space between the valve and its white support;
- The slot is open before starting the feed.
Insert the zero cannula bubbles (not included in 330 ml bottles) into the blank valve. The zero cannula bubbles prevents the formation of air bubbles in milk which, if they are ingested, could cause gaseous colic and gastric reflux. The cannula can be removed when the child will stop suffering from colic. Never remove the low silicone valve. Low blank in the bottle can prevent possible otitis in the first years of life.
Insert the blank low valve with the zero cannula bubbles in the bottle opening.
Place the teat in the ring nut and screw the ring nut to the bottle (do not tighten too much to allow optimal ventilation).
To mix the milk powder quickly rotate the bottle.
As a precaution it is recommended to check the temperature of the liquid by pouring a few drops on the back of the hand.
Beating the child holding it in my lap in the semi-upright position.
After feeding, remove all parts of the bottle and wash them in hot water and soap. It is recommended to use the set of Twister punches to clean bottle and teat.
Use the special pipe cleaner supplied to clean the inside of the zero cannula bubbles (not included in the 330 ml bottles) but not to use it to clean the low-empty valve or the teat to not perforate them.
After carefully washed the bottle and all its components repeat step 1 or store in a cool, dry place, out of reach of children.
Before warming the liquids in the bottle, loosen or remove the ring nut with the teat to avoid overheating of the content.
To ensure the correct operation of the blank valve, make sure that:
- there is no space between the white valve support and the valve itself;
- the slot is open before the feed; - The ring is well screwed, but not too tight.
Traveling, put the appropriate cap and the sealant disk to avoid losses and dripping from the teat.
Warnings
Temperature changes can cause crepe or bottle break. Before each use check carefully that the bottle's neck has no sharp edges and there are no fragments inside. Do not use the bottle in the presence of cracks or glass fragments inside.
- Keep all components out of the reach of children.
- Heat the liquids to the microwave is not recommended because they could warm up unevenly. Always check the temperature of the liquid before administration.
- Use this product always under the supervision of an adult. Do not leave the baby bottle unattended within reach of a child, it could be dangerous.
- Do not use the pacifier as a nose.
- The continued and prolonged habit of sucking liquids during the day and especially at night - when salivation is reduced - can cause dental caries, even if liquids are not sugary.
- Do not put in bag or in a bottle suitcase containing liquids. If the bottle is accidentally damaged, its content may come out.
Format
Pack containing cap, ring, teat, sealing disk, white plastic support for blank low valve, bass anti-drip base valve, zero cannula bubbles, bottle, cranket for zero cannula bubbles.
Cod. 12052
