Description
Reactive strips to measure blood sugar.
They deliver accurate results in 5 seconds.
Small blood samples are required (1mc).


Mode of use
òInsert the reactive strips in the door of the reactive strips with the contact bars facing the glucometer.
òTenendo the finger stretched and steady, move the instrument and reactive strip to the drop of blood.
ò Touch gently the channel of the reactive strip on the edge of the drop of blood.
ò Wait for the intake channel to fill completely. The drop of blood will be sucked into the capillary channel and you should fill it completely.

Conservation
Store in a cool and dry place at a temperature between 5 °C and 30 °C

Warnings
- If there is condensation (water vapor deposition) on the glucometer, do not test. Before running the test move the glucometer and reactive strips to a cooler and dry place and wait for the surface of the instrument to dry. - Do not open the reactive strip bottle until you are ready to take a strip and run a test. Use the reactive strip immediately after extracting it from the bottle, especially if you are in environments with high humidity.
- Securely close the bottle immediately after use, to avoid contamination or damage. Store unused reactive strips exclusively in their original bottle. - Don't put the reactive strip in the bottle after running a test.
- Do not reuse a reactive strip on which blood or control solution has been applied. The reactive strips are exclusively disposable.
- Do not test with a folded or damaged reactive strip.
- You can touch the reactive strip at any point with dry and clean hands. Do not bend, cut or change the reactive strips in any way.
- When you open a new bottle of reactive strips, check the expiration date.

Format
Flacone with 25 stripes.

Co 023-299