Descrizione Clinica
Protesan quick repair prostheses
PROTEAN
Description
Two-component self-hardening resin, consisting of liquid and polymethylmethacrylate powder.
Mode of use
Repair dental implants.
- Clean the prosthesis and dry it thoroughly.
- Rub with the sanded paper about 5 mm of each part adjacent to the lesion, until it roughens the surface.
- Make sure the two parts are perfectly combo.
- Open the A jar containing the predose powder, add 35-40 drops of the liquid contained in the bottle B with the appropriate dropper.
- Mix with the spatula until obtaining a homogeneous compound of collous density.
- Using the spatula, apply the mixture along the whole embellishment, taking care of obtaining a thickness of about 2 mm and a width of 5/6 mm covering the surface previously abraded with the sanded paper.
- Moisten with liquid B the tip dl a finger and make uniform the applied layer.
- Wait 15 minutes to ensure that the compound is perfectly hardened (hardening time depends on the ambient temperature).
- Any presence of a white halo does not alter repair.
- Remove any compound residues resulting from the repair with the sanded paper.
- Rinse the prosthesis.
Detachment of a tooth from the prosthesis.
- Determine with a cotton ball with liquid B both tooth and cavity.
- Open the A jar containing the predose powder, add 35-40 drops of the liquid contained in the bottle B with the appropriate dropper.
- Mix with the spatula until obtaining a homogeneous compound of collous density (not particularly dense).
- Introduce a small amount of compound into the cavity and apply the tooth.
- Moisten the tip of a finger with liquid B, then clean the excess compound around the applied tooth.
- Let it harden for about 15 minutes and rinse the prosthesis.
Warnings
The components are flammable. Keep away from sources of heat and burning lives. Avoid contact of products with eyes. In case of contact, rinse thoroughly with hot water. Do not use the product in case of proven allergy to the components. Do not put the product in contact with wounds or abrasions.
Never apply the product in the inner part of the dental prosthesis in contact with the gum. The application is responsible for the user.
The repair does not eliminate the causes that caused the break, therefore, despite the excellent resistance of the product, it is recommended to contact your dentist. The dental technician is able to carry out the final repair, if the operating instructions have been executed correctly. Keep out of reach of children.
Conservation
Store in a cool and airy place (
Cod. 007
Two-component self-hardening resin, consisting of liquid and polymethylmethacrylate powder.
Mode of use
Repair dental implants.
- Clean the prosthesis and dry it thoroughly.
- Rub with the sanded paper about 5 mm of each part adjacent to the lesion, until it roughens the surface.
- Make sure the two parts are perfectly combo.
- Open the A jar containing the predose powder, add 35-40 drops of the liquid contained in the bottle B with the appropriate dropper.
- Mix with the spatula until obtaining a homogeneous compound of collous density.
- Using the spatula, apply the mixture along the whole embellishment, taking care of obtaining a thickness of about 2 mm and a width of 5/6 mm covering the surface previously abraded with the sanded paper.
- Moisten with liquid B the tip dl a finger and make uniform the applied layer.
- Wait 15 minutes to ensure that the compound is perfectly hardened (hardening time depends on the ambient temperature).
- Any presence of a white halo does not alter repair.
- Remove any compound residues resulting from the repair with the sanded paper.
- Rinse the prosthesis.
Detachment of a tooth from the prosthesis.
- Determine with a cotton ball with liquid B both tooth and cavity.
- Open the A jar containing the predose powder, add 35-40 drops of the liquid contained in the bottle B with the appropriate dropper.
- Mix with the spatula until obtaining a homogeneous compound of collous density (not particularly dense).
- Introduce a small amount of compound into the cavity and apply the tooth.
- Moisten the tip of a finger with liquid B, then clean the excess compound around the applied tooth.
- Let it harden for about 15 minutes and rinse the prosthesis.
Warnings
The components are flammable. Keep away from sources of heat and burning lives. Avoid contact of products with eyes. In case of contact, rinse thoroughly with hot water. Do not use the product in case of proven allergy to the components. Do not put the product in contact with wounds or abrasions.
Never apply the product in the inner part of the dental prosthesis in contact with the gum. The application is responsible for the user.
The repair does not eliminate the causes that caused the break, therefore, despite the excellent resistance of the product, it is recommended to contact your dentist. The dental technician is able to carry out the final repair, if the operating instructions have been executed correctly. Keep out of reach of children.
Conservation
Store in a cool and airy place (
Cod. 007
