Descrizione Clinica
First aid Esenta remove ades spray 50ml Convatec Italy
Protective spray
ESENTA
Description
Silicone hypoallergenic spray for atraumatic and delicate removal of medical stickers or adhering devices: devices for stomia, patches and adhesive residues.
The spray contains a mixture of silicone fluids that, once applied, breaks the bond between adhesive and skin, allowing for easier removal of the adhesive. The silicone formulation has a very low viscosity, it easily applies and evaporates quickly without leaving residues.
The content of the product is transparent and colourless. The spray is free of alcohol.
Purpose to facilitate the atraumatic removal of medical adhesives by reducing trauma from tear and protecting the skin from irritation. Once used in the area concerned, it dries in seconds and leaves no residue. The product moisturizes the skin leaving it soft, silky and ready to join a new device or a new dressing. In contact with the skin does not burn even in the presence of irritation. At the time of the application you could feel a slight feeling of freshness in the affected area.
The spray is hypoallergenic and not unge. You can apply from any angle.
Mode of use
1. Spray around the edge of the adhesive and wait a few seconds.
2. Gently remove the adhesive from the skin using, if necessary, other spray to facilitate removal.
Warnings
- Avoid direct use on the lesion bed.
- Avoid use on delicate and sensitive parts of the skin (eyes, mouth, ears, nose, vagina).
- In case of doubt, test the product on a small area rhyme of use.
- In the presence of skin irritation, stop use and consult a health care professional.
- Avoid inhalation.
- Exclusively for external use.
Use only according to the instructions. Pressurized container: can burst if heated. Keep away from heat sources, hot surfaces, sparks, free flames or other sources of ignition. Smoking not allowed. Do not pierce or burn even after use. Protect from sunlight. Do not expose at temperatures above 50 °C/122 °C. Keep out of reach of children. Highly flammable.
Conservation
The product must be protected from solar exposure and temperatures above 50 °C.
Integro packaging validation: 48 months.
Format
50 ml bottle.
Cod. 423289
Silicone hypoallergenic spray for atraumatic and delicate removal of medical stickers or adhering devices: devices for stomia, patches and adhesive residues.
The spray contains a mixture of silicone fluids that, once applied, breaks the bond between adhesive and skin, allowing for easier removal of the adhesive. The silicone formulation has a very low viscosity, it easily applies and evaporates quickly without leaving residues.
The content of the product is transparent and colourless. The spray is free of alcohol.
Purpose to facilitate the atraumatic removal of medical adhesives by reducing trauma from tear and protecting the skin from irritation. Once used in the area concerned, it dries in seconds and leaves no residue. The product moisturizes the skin leaving it soft, silky and ready to join a new device or a new dressing. In contact with the skin does not burn even in the presence of irritation. At the time of the application you could feel a slight feeling of freshness in the affected area.
The spray is hypoallergenic and not unge. You can apply from any angle.
Mode of use
1. Spray around the edge of the adhesive and wait a few seconds.
2. Gently remove the adhesive from the skin using, if necessary, other spray to facilitate removal.
Warnings
- Avoid direct use on the lesion bed.
- Avoid use on delicate and sensitive parts of the skin (eyes, mouth, ears, nose, vagina).
- In case of doubt, test the product on a small area rhyme of use.
- In the presence of skin irritation, stop use and consult a health care professional.
- Avoid inhalation.
- Exclusively for external use.
Use only according to the instructions. Pressurized container: can burst if heated. Keep away from heat sources, hot surfaces, sparks, free flames or other sources of ignition. Smoking not allowed. Do not pierce or burn even after use. Protect from sunlight. Do not expose at temperatures above 50 °C/122 °C. Keep out of reach of children. Highly flammable.
Conservation
The product must be protected from solar exposure and temperatures above 50 °C.
Integro packaging validation: 48 months.
Format
50 ml bottle.
Cod. 423289
