Descrizione Clinica
Visco-Vision Gel
Description
hypotonic and viscous humidifying gel with 0.2% of Carbomer 980. Visco-Vision Gel shows excellent mucoadesive properties. Thanks to its moistening effect, it acts evenly on the surface of the cornea and the conjunctiva ensuring a beneficial and prolonged hydration of the eye.
It can be used for the following directions:
-dry eyes caused by Sjögren syndrome;
-mechanical sollicitation, e.g. following diagnostics on the eye;
-environmental stress, e.g. to air-conditioned premises, wind, cold, dry air or containing harmful substances, for example smoking cigarettes;
-tireness and visual stress due to an intense use of vision, e.g. for computer activity, microscope or long periods of driving.
Mode of use
Before using Visco-Vision Gel, wash your hands thoroughly. To open the tube, turn the screw cap counter counterclockwise until you break the safety lock. After the first opening of the tube remove the safety ring.
Step 1: lightly recline the head backwards (position of the neck) and with the free hand slightly lower the lower eyelid.
Step 2: hold the tube vertically, with the opening down, above the eye. Press slightly on the tube until a small drop is formed on the tip. Apply the drop into the joint bag of the affected eye avoiding touching the eye with the tip of the tube.
Step 3: close the eyes twice or three times, so that the gel is evenly distributed on the surface of the eye. After use, close the tube with the protective cap paying attention not to touch anything with the tip (not even the finger). Avoid crushing or roasting the tube, so as not to damage it.
Apply Visco-Vision Gel according to the needs or indication of the ophthalmologist. In general, for adults and children we recommend the application of 1 drop 3-4 times a day. Visco-Vision® Gel is suitable for prolonged use. However, as with all other diseases, if the disorders are protracted, it is appropriate to consult an ophthalmologist. In case of further local eye treatment, it is necessary to wait about 30 minutes between the two applications. Visco-Vision Gel should be applied after other products.
Components
Carbomer 980 (0.2 %), sorbitol, sodium hydroxide, edified disode, cucumber (0.01 %) and purified water.
Warnings
-Do not use the product if the tube or safety lock are damaged.
-Do not touch the eye with the tip of the tube, so as to avoid infections or injury to the eye.
-The tip of the tube should not get in touch with other objects or parts of the body, so as to avoid bacterial contamination of the gel.
-Before use remove contact lenses and apply them only after waiting at least 30 minutes.
-Do not use Visco-Vision Gel after the expiration date, which is indicated on the fold of the tube and on the packaging.
-For hygiene reasons, the same Visco-Vision Gel tube should not be used by multiple patients.
-If eye disorders persist during use of Visco-Vision® Gel or film after suspension, consult your ophthalmologist.
-Visco-Vision Gel is not suitable as the only treatment for an eye infection. If you suspect an eye infection, contact your eye doctor.
-Do not use in case of hypersensitivity (allergy) known to one of the components.
-Suitable for use in children and adults from 18 years.
-For pregnant or breastfeeding women and children under 18 years of age, clinical data is not available. These patient groups should consult their doctor before using Visco-Vision Gel.
-Conserve Visco-Vision Gel outside the reach of children.
-Only for external use.
Side effects:
-After use, a deterioration of visual acuity may occur transiently (unused view). In this case avoid driving vehicles and operating machinery. It is recommended to wait until you recover the normal visual acuity.
-Submitted after application can manifest symptoms such as a slight and temporary burning in the eyes or sticky eyelids.
Conservation
Store at temperatures between 5°C and 25°C.
Protect from frost and direct sunlight.
Format
Eye gel in single tubes of 10 g.
Cod.MD1
hypotonic and viscous humidifying gel with 0.2% of Carbomer 980. Visco-Vision Gel shows excellent mucoadesive properties. Thanks to its moistening effect, it acts evenly on the surface of the cornea and the conjunctiva ensuring a beneficial and prolonged hydration of the eye.
It can be used for the following directions:
-dry eyes caused by Sjögren syndrome;
-mechanical sollicitation, e.g. following diagnostics on the eye;
-environmental stress, e.g. to air-conditioned premises, wind, cold, dry air or containing harmful substances, for example smoking cigarettes;
-tireness and visual stress due to an intense use of vision, e.g. for computer activity, microscope or long periods of driving.
Mode of use
Before using Visco-Vision Gel, wash your hands thoroughly. To open the tube, turn the screw cap counter counterclockwise until you break the safety lock. After the first opening of the tube remove the safety ring.
Step 1: lightly recline the head backwards (position of the neck) and with the free hand slightly lower the lower eyelid.
Step 2: hold the tube vertically, with the opening down, above the eye. Press slightly on the tube until a small drop is formed on the tip. Apply the drop into the joint bag of the affected eye avoiding touching the eye with the tip of the tube.
Step 3: close the eyes twice or three times, so that the gel is evenly distributed on the surface of the eye. After use, close the tube with the protective cap paying attention not to touch anything with the tip (not even the finger). Avoid crushing or roasting the tube, so as not to damage it.
Apply Visco-Vision Gel according to the needs or indication of the ophthalmologist. In general, for adults and children we recommend the application of 1 drop 3-4 times a day. Visco-Vision® Gel is suitable for prolonged use. However, as with all other diseases, if the disorders are protracted, it is appropriate to consult an ophthalmologist. In case of further local eye treatment, it is necessary to wait about 30 minutes between the two applications. Visco-Vision Gel should be applied after other products.
Components
Carbomer 980 (0.2 %), sorbitol, sodium hydroxide, edified disode, cucumber (0.01 %) and purified water.
Warnings
-Do not use the product if the tube or safety lock are damaged.
-Do not touch the eye with the tip of the tube, so as to avoid infections or injury to the eye.
-The tip of the tube should not get in touch with other objects or parts of the body, so as to avoid bacterial contamination of the gel.
-Before use remove contact lenses and apply them only after waiting at least 30 minutes.
-Do not use Visco-Vision Gel after the expiration date, which is indicated on the fold of the tube and on the packaging.
-For hygiene reasons, the same Visco-Vision Gel tube should not be used by multiple patients.
-If eye disorders persist during use of Visco-Vision® Gel or film after suspension, consult your ophthalmologist.
-Visco-Vision Gel is not suitable as the only treatment for an eye infection. If you suspect an eye infection, contact your eye doctor.
-Do not use in case of hypersensitivity (allergy) known to one of the components.
-Suitable for use in children and adults from 18 years.
-For pregnant or breastfeeding women and children under 18 years of age, clinical data is not available. These patient groups should consult their doctor before using Visco-Vision Gel.
-Conserve Visco-Vision Gel outside the reach of children.
-Only for external use.
Side effects:
-After use, a deterioration of visual acuity may occur transiently (unused view). In this case avoid driving vehicles and operating machinery. It is recommended to wait until you recover the normal visual acuity.
-Submitted after application can manifest symptoms such as a slight and temporary burning in the eyes or sticky eyelids.
Conservation
Store at temperatures between 5°C and 25°C.
Protect from frost and direct sunlight.
Format
Eye gel in single tubes of 10 g.
Cod.MD1
